Nest Cam Outdoor – My experiences

So a couple of months ago some bastard keyed my car. My initial knee jerk reaction was to buy a CCTV camera to watch over it in case it happened again, so I knew who’s knees to break. So the search began, but I wanted something fast.

I looked at a couple of offerings but I wanted something easy and quick to install, and preferably without too many cables to run around the house. I settled in the Nest Cam Outdoor, after owning their thermostat for a year and being very pleased with its performance and functionality.

When the camera arrived it was very well packaged with the usual plethora of mounting hardware. The kit comes with long enough cables for most installations and all the required fixing hardware, including cable clips, which was nice.

The mounting system for the camera uses strong magnets to hold it in place. While this is a novel idea, in practice a well-aimed football will knock the camera off the wall and render it useless. Points lost there unfortunately.

The cable attached to the nest has a ruggedized USB connector on it that’s approximately 18mm diameter. All well and good until you need to run it through a wall. I know this camera is meant for American homes which I presume mostly have outdoor power outlets, but that’s an uncommon facility in the UK. Drilling an 18mm+ hole in a double skinned brick wall is no simple task. More points lost there.

Once installed the camera is easy to set up using the Nest iOS or Android apps. Scan the bar code on the app and away you go. Don’t forget you’ll need a constant internet connection for the camera to work though.

The video quality of the camera even in daylight is shit considering it is allegedly 1080p. While the camera sensor probably is 1080p, the camera compressed the nuts off the video to upload it to Google’s cloud platform, losing most of the quality. I honestly can’t even read the number plate of my car from the video, and the car is parked maybe 15 feet from the camera, if that. Image quality is even worse at night.

Remember Google’s server I just mentioned? They only allow the camera to store 3 hours of footage, unless you buy a Nest Aware subscription to store up to 10 days, or 30 days, whichever tickles your fancy. This isn’t particularly well communicated by Nest either, to the point that when my “Free Trial” expired, I didn’t even get a notification to say “Hey, your camera has just deleted all video over three hours old! Best break the credit card out!” Thinking about this logically, if somebody broke into my car between 1am and 3am, I wouldn’t have any footage of it at all. What’s the point?

In conclusion, don’t buy this camera. It’s effectively a glorified, very expensive, video doorbell without a subscription, which wouldn’t be as bad if the cost of the camera wasn’t so fucking much to start with. Even then, you can’t make out facial features unless the camera is installed at a level where the magnets make it easy to sabotage. Again, what’s the point?

Honestly. Don’t waste your money. This device has the potential to be awesome, but is used as a cash cow by Nest instead.

Meters Music OV-1 – My Opinion

For anybody that has been living under a rock since CES 2017, there’s a new kid on the block when it comes to prosumer headphones. The Meters Music OV-1 by Ashdown Engineering.

I recently purchased a set of these headphones after watching countless interviews with Ashdown at CES, and reading some reviews of the headphones by tech websites. The reviews weren’t all 100% but that’s expected in this day and age, and I tend to listen to different styles of music than the reviewers, so I decided to give them a try all the same.

Packaging

Opening the packaging wasn’t awe-inspiring like some high-end products I receive, but it was a pleasant experience all the same. The inclusion of two cables, one including an inline mic and one not, was a nice touch and they were decently built cables. The included Micro USB for charging on the other hand was just some generic cable you can probably buy from eBay for a few pence.

The headphones themselves were in the included hard case but lacked any additional packaging. The inclusion of some sticky protective plastic on the alloy cups would have been nice, and would have probably prevented the small scuff mark on the left cup. It looks like the box might have been dropped in transit and the holder for the cup has hit the cup. It’s hard to see under normal use, but I know it’s there!

OV-1 Scuff mark on cup.jpg

Aesthetic & Build Quality

The headphones are pleasing on the eye with good industrial design, and the inclusion of the VU line meters on the ear cups is cool but a bit of a gimmick. The overall look of the sweeping, single mount cup holder, coupled with the stylish, albeit plastic, hinge mechanism is a well designed and engineered look for these alloy headphones. The transition from alloy to protein leather, with its neatly stitched seems, is also well executed.

The biggest let down from an aesthetic perspective is the use of black plastic on the hinge and hangar mechanism. even just colour coding the plastic to the alloy would have served their vision better in my opinion.

The headphones feel well constructed though and I can’t really knock the build quality other than the slightly over tightened hex screw holding the left ear cup in, which I had to file a couple of burrs off to appease my OCD.

IMG_1907.jpg

A bit more consideration of the positioning of the three-way switch (EQ, Passive, Active Noise Cancelling) would have been nice. It is currently located under the ear cup holder, meaning you have to remove the headphones to change the mode. I feel it would have made the experience just that little bit more pleasing if it had been somewhere a little easier to reach during use.

Comfort

From a comfort perspective, they take a bit of adjustment and getting used to, but after a couple of days you barely even notice they are on your head. During the initial honeymoon period where they were on and off my head every few minutes for adjustment, the clamping force of the sprung steel headband was a bit overwhelming and didn’t ease any until I had forced the headband apart a few times over the course of a day.

The headband also applied pressure to the top of my head until I found the correct hight for the height adjustable cup sliders. Unfortunately the mechanism on the sliders is too week and the cups tend to lose their position whenever I stretch the headphones enough to put them over my head. This is annoying and needs to be fixed in any future release.

IMG_1906.jpg

To give Meters their due, the fake “protein” leather on the ear cups is comfortable, but isn’t sweat proof as claimed. However the sweat is a lot less noticeable to the point it didn’t bother me like it does on other headphones.

Noise Cancellation

In the interest of full disclosure, I am yet to try the noise cancelling feature (ANS) on any mode of transport, which is the main use case for such technology. I have, however, tried it out in some server rooms where the constant drone of server fans are drowned out to the point of being almost silent while using the headphones without an audio source connected. The slight hiss of the ANS system doing it’s thing is just audible though, until I start playing some music, of course.

All in all I’m happy with the ANS system and would even stretch to call it the best I have used yet, although I’ve probably only experienced a total of five other noise cancelling systems in the past.

Sound Quality

I’m no audiophile, but I do appreciate great sounding music. I also listen to a wide variety of music so I’ve put the headphones though their paces with a few genres, from Heavy Metal to UK Hardcore and everything in between.

The headphones sound great and have decent volume when listening in passive mode (or off). They offer crisp high ends, prominent mid range and deep bass. Switching the ANS on reduces volume somewhat, and dampens the high ends a little but still maintains a decent sound quality with adequate volume.

EQ mode, the final sound option, sounds terrible. It’s pointless beating around the bush, the bottom end is far too overpowering and crushes the high-end. I can’t find a single song that sounds good while using the mode so I just don’t use it. I seriously wish the headphones allowed the user to tune and tweak the EQ setting using the USB connection.

Summary

All things considered, I like the OV-1 headphones. They are the best sounding headphones I have used (apart from the EQ setting) and they are extremely comfortable for prolonged use at work. As a developer I often spend hours on end listening to music to drown out the bustle of the office. They also give a bit more depth to podcasts and significantly improve the usually mediocre sound quality of them.

I’m still not sure If I would wear them in public though. Maybe if Meters allowed you to control whether the VU meters were on or off independently of the noise cancelling feature I might be more inclined to, but as they stand, they could look a bit obnoxious in certain environments.

In conclusion, if you are an audiophile, don’t bother. If you are a run of the mill prosumer who likes gadgets and great sounding music, then these headphones are good bang for your buck. Plus they don’t feed more of you hard-earned cash into Apple’s coffers.